Office of the University Registrar

Chemical Engineering

Although chemical engineering has existed for only 100 years, its name is no longer completely descriptive of this dynamic profession. The work of the chemical engineer is not restricted to the chemical industry, chemical changes or chemistry. Instead, modern chemical engineers are concerned with all the physical, chemical and biological changes of matter that can produce an economic product or result that is useful to mankind.

About This Major

  • College: Engineering
  • Degree: Bachelor of Science in Chemical Engineering
  • Hours for the Degree: 134
  • Minor: No
  • Combined-Degree Program: Yes
  • Website: undergraduate.che.ufl.edu/curriculum

Overview

The education of the chemical engineer is based on the fundamental sciences of physics, chemistry and biology, on mathematical and computer techniques, and on basic engineering principles. This background makes the chemical engineer extremely versatile and capable of working in a variety of industries: chemical, biochemical, petroleum, materials, microelectronics, environmental, food processing, consulting and project management. It is also good preparation for law and medical schools.

Department Requirements

Successful applicants must have earned a 2.5 grade point average or higher in the eight preprofessional courses and have earned a grade point average of 2.5 or higher in the preprofessional calculus course sequence. Transfer students and applicants from other universities must have earned an overall 3.0 GPA in addition to meeting previously stated requirements.

For the purposes of determining admission to or retention in the department, grade point averages will be based on the last of no more than two attempts for each course. Students must maintain satisfactory progress (GPA of 2.0 or higher) in chemical engineering courses and in their overall record.

To proceed to succeeding courses, C grades or better are required in ECH 3023, 3101, 3203, 3223, 3264 and COT 3502 within two enrollments (including withdrawals) for each course.

Any course taken to satisfy a degree requirement (general education, required course or technical elective) with the exception of ECH 4948 and 4949, cannot be taken with the S-U grade option.

Educational Objectives

Within a few years of obtaining a bachelor's degree in chemical engineering from the University of Florida, the recent graduate:

  • Demonstrates professional engineering competence via promotions and/or positions of increasing responsibility, or successfully transitions from the traditional chemical engineering career path into business, government, education, etc.;
  • Achieves and leads on-the-job safety and environmental protection;
  • Contributes to achievement of organizational objectives with significant societal benefits;
  • Publishes papers and/or internal reports, applies for patents, delivers conference presentations and/or contributes to innovative, state-of-the-industry articles; and
  • Participates in life-long learning via progress toward or successful completion of an advanced degree, continuing education courses, professional engineering certification, professional development courses and/or industry training courses.

The chemical industry alone provides an opportunity for the chemical engineer to participate in the research, development, design or operation of plants for the production of new synthetic fibers, plastics, chemical fertilizers, vitamins, antibiotics, rocket fuels, nuclear fuels, paper pulp, photographic products, paints, fuel cells, semiconductors and the thousands of chemicals that are used as intermediates in the manufacture of these products.

Back to Top

Goal

To prepare students for life-long careers in chemical engineering.

Mission

To offer high-quality undergraduate and graduate degree programs in chemical engineering and to conduct research that helps educate graduate students and serves the needs of Florida and the nation.

To proceed to succeeding courses, C grades or better are required in ECH 3023, 3101, 3203, 3223, 3264 and COT 3502 within two enrollments (including withdrawals) for each course.

Any course taken to satisfy a degree requirement (general education, required course or technical elective) with the exception of ECH 4948 and 4949, cannot be taken with the S-U grade option.

To graduate with this major, students must complete all university, college and major requirements.

Critical Tracking and Recommended Semester Plan

Equivalent critical tracking courses as determined by the State of Florida Common Course Prerequisites may be used for transfer students

Semester 1

  • 2.0 UF GPA required for semesters 1-5
  • 2.5 GPA on all critical-tracking coursework for semesters 1-5
  • Complete 1 of 8 tracking courses with a minimum grade of C within two attempts:
    CHM 2045 or CHM 2095, CHM 2046 or CHM 2096, MAC 2311, MAC 2312,
    MAC 2313, MAP 2302, PHY 2048, PHY 2049

Semester 2

  • Complete 1 additional course with a minimum grade of C within two attempts

Semester 3

  • Complete 2 additional courses with minimum grades of C within two attempts

Semester 4

  • Complete 2 additional courses with minimum grades of C within two attempts

Semester 5

  • Complete all 8 critical-tracking courses with minimum grades of C in each course within two attempts

Back to Top

To remain on track, students must complete the appropriate critical-tracking courses, which appear in bold.

Recommended semester plan

Semester 1Credits
If you do not place out of ENC 1101, take it in the fall.
ABE 2062 Biology for Engineers or
BSC 2011 Integrated Principles of Biology 2
3
CHM 2045 General Chemistry 1 (GE-P) or
CHM 2095 Chemistry for Engineers 1 (GE-P)
3
CHM 2045L General Chemistry 1 Laboratory (GE-P)1
MAC 2311 Analytic Geometry and Calculus 1 (GE-M)4
Humanities (GE-H)3
Total 14
Semester 2Credits
CHM 2046 General Chemistry 2 (GE-P) or
CHM 2096 Chemistry for Engineers 2 (GE-P)
3
CHM 2046L General Chemistry 2 Laboratory (GE-P)1
MAC 2312 Analytic Geometry and Calculus 2 (GE-M)4
PHY 2048 and 2048L General Chemistry 2 (3) and General Chemistry 2 Laboratory (1) (GE-P)4
Social and Behavioral Sciences (GE-S)3
Total 15
Semester 3Credits
ECH 3023 Material and Energy Balances4
MAC 2313 Analytic Geometry and Calculus 3 (GE-M)4
MAP 2302 Elementary Differential Equations (GE-M)3
PHY 2049 and 2049L Physics with Calculus 2 (3) and Physics with Calculus 2 Laboratory (1) (GE-P)4
Total 15
Semester 4Credits
CHM 4411 Physical Chemistry4
COT 3502 Computer Model Formulation4
ECH 3264 Elementary Transport Phenomena3
ECH 4934 Professional Seminar1
STA 3032 Engineering Statistics3
Total 15
Semester 5Credits
CHM 2210 Organic Chemistry 13
ENC 3254 Professional Writing in the Discipline (GE-C)3
Humanities (GE-H)3
Social and Behavioral Sciences (GE-S)3
Total 12
Semester 6Credits
CHM 2211 and 2211L Organic Chemistry 2 (3) and Organic Chemistry 2 Laboratory (2)5
ECH 3101 Process Thermodynamics3
ECH 3203 Fluid and Solids Operations3
ECH 3223 Energy Transfer Operations3
Total 14
Semester 7Credits
CGN 3710 Experimentation and Instrumentation in Civil Engineering or
EEL 3003 Elements of Electrical Engineering
3
ECH 4123 Phase and Chemical Equilibria3
ECH 4224L Fluid and Energy Transfer Operations Laboratory *2
ECH 4403 Separation and Mass Transfer Operations3
ECH 4714L Safety and Experimental Evaluation2
Technical elective3
Total 16
Semester 8Credits
ECH 4404L Separation and Mass Transfer Operations Laboratory2
ECH 4504 Chemical Kinetics and Reactor Design4
ECH 4604 Process Economics and Optimization3
ECH 4824 Materials of Chemical Engineering2
Humanities (GE-H) or Social and Behavioral Sciences (GE-S)3
Technical elective3
Total 17
Semester 9Credits
CHM 3120 Introduction to Analytical Chemistry3
ECH 4323 Process Control Theory3
ECH 4323L Chemical Engineering Laboratory1
ECH 4644 Process Design **3
Chemical engineering technical elective3
Technical elective3
Total 16

Technical Electives

Technical electives are defined as department-approved, upper-division courses with significant science and/or math content. Provision is made to receive up to three credits of approved co-op, internship and/or research experience. Military courses cannot be used for technical electives.

* Students are strongly encouraged to register for ECH 4224L Fluid and Energy Transfer Operations Laboratory immediately following completion of ECH 3101, ECH 3203 and ECH 3223.

** The Integrated Product and Process Design program (ECH 4912 and ECH 4913) requires six hours of coursework and is offered as a sequence of two three-credit courses during fall and spring of the senior year. These two courses are pre-approved substitutes for three credits of technical electives and for ECH 4644 Process Design.

Back to Top